图24 两零件的Front面匹配
加入第二个装配限制条件，选取zhuzhou的Front面与螺旋片1的Front面，输入间距：0，使之匹配。见图25。
图25 两零件的right面匹配。
加入第三个装配限制条件，选取zhuzhou的right面与螺旋片1的right面，输入间距：0，使之匹配。
图26 螺旋轴组件
重复以上步骤，分别装配螺旋片2，3，4。完成螺旋轴的装配，如图26。
12 致谢
在设计过程中，指导教师肖念新对我进行了悉心指导和帮助，并为我提供了大量的相关书籍和资料，对设计顺利的完成帮助很大。在这里衷心感谢肖老师的指导。
The design of spiral juice extractor on the based Pro/E
Yujunbo
(Dpet.of Machinery and Electron,
Hebei Noemal University of Science & Technology)
Abstract: Pro/ENGINEER Wildfire prairie fire edition is 2. 0 easy to learn and use , not powerful to with characteristic of interconnection and interflow , promote whole product development personal efficiency and improvement, course of efficiency in the organization with it. It can not only can save the time and cost improve product quality but also. On the basis of the strong function of Pro/E , originally design the design utilizing Pro/E to finish the spiral type continuous juice extractor, the spiral type continuous juice extractor is of simple structure , easy to operate , presses the high advantage of juice efficiency but used widely with its . As to at present, the spiral type continuous juice extractor is used in food mainly, for squeezing the juices of such fruits and vegetables as the apple、pear、tomato、pineapple、orange、carrot etc.
Keywords: Pro/E ;juice extractor ;spiral type
参考文献:
[1]刘长荣 肖念新 工程力学 [M] 中国农业科技出版社 2002.2
[2]张裕中 食品加工技术装备 中国轻工业出版社2000.3
[3]刘长荣 郑玉才 机械设计基础（下）[M] 中国农业科技出版社 2002.2
[4]林清安 Pro/ENGINEER Wildfire零件设计基础篇（上）[M] 中国铁道出版社 2004.5
[5]林清安 Pro/ENGINEER Wildfire零件设计基础篇（下）[M] 中国铁道出版社 2004.5
[6]朱龙根 简明机械零件设计手册 机械工业出版社[M] 1997.11
[7]垄溎义 机械设计课程设计指导书 高等教育出版社[M] 1982.9
[8]杨永才 机械设新标准手册计[M] 北京科学技术出版社[M] 1993.8
