机械设计论文网


  • 首页|
  • 机械模具设计论文|
  • 机械模具开题报告|
  • 机械模具免费论文|
  • 机械模具外文翻译|
  • 数控论文|
  • 机械原创论文|
  • 焊工钳工论文|
  • 理工科论文|
         模具专业毕业设计   机械专业毕业设计   数控专业毕业设计

论文降重

当前位置:机械设计论文网 -> 机械模具毕业设计论文 -> 30分钟机械定时器的设计

30分钟机械定时器的设计

本文ID:LW15237 字数:18625.页数:36

下载地址 全文下载链接(充值:168元) 如何充值?

30分钟机械定时器的设计

论文编号:JX707  论文字数:18625.页数:36   附CAD图

30分钟机械定时器的设计.png

摘     要:
 定时器是一种延时时间开关,它广泛的应用于各种洗衣机、电烤箱、电风扇等家用电器中。在众多的定时器中机械式定时器以其低廉的成本,方便的操作、容易生产等特点在发展中国家中仍有较高的市场价值。机械定时器主要依靠发条弹簧作为动力源,通过擒纵轮的调节,齿轮机构的传动来达到定时的目的,所以整个产品中各个零部件的生产设计非常重要。本文主要针对30分钟走时机械定时器的原理结构进行分析,然后接合实际生产进行设计。
 
关键词: 定时器 机械 齿轮传动 设计

 30minutes mechanical timer design
 

Abstract
Timer is a delay time switch, is widely used in a variety of washing machine, electric oven, electric fans and other household appliances. Among the timer in the mechanical timer, with its low costs, easy operation, easy to produce and so there are still high in developing countries, the market value. Rely mainly on mechanical clockwork timer spring as a power source, through the regulation of escape wheel, the transmission gear mechanism to achieve the purpose of time, so the various components throughout the product design is very important to the production. In this paper, mechanical timer for 30 minutes, the principle of structural analysis, and then bonding the actual production design.

Keywords: Timer;A gear drive;Mechanical;Production design

 

目 录
中文摘要 ⅰ
英文摘要 ⅱ
目录 ⅲ
第一章     绪论 1
1.1  机械定时器的原理 1
1.2  机械定时器的结构特点 1
1.3  机械定时器的优缺点 2
1.4  机械定时器的设计方法 3
第二章    机械定时器的生产设计  4
2.1   用途和影响使用的因素 4
2.2   生产的设计 4
2.3   生产过程 5
2.4   大量生产的设计 5
2.4.1 大量生产过程 5
2.4.2 对机械定时器的要求 6
2.4.3 机械定时器用的金属材料 7
2.4.4 润滑 7
2.5  定时器零部件的制造方法 8
2.5.1 擒纵件 8
2.5.2 齿轮 8
2.5.3 游丝 8
2.5.4 其他零件 8
第三章     零部件的设计 9
3.1   引言 9
3.1.1  设计考虑 9
3.1.2  定时器的精度 11
3.2   动力源 11
3.2.1  弹簧原动机 11
3.2.2  发条原动机的比较 15
3.3   齿轮系 16
3.3.1  计数系统 16
3.3.2  齿轮系的类型 16
3.3.3  与小机构齿轮相关的特殊问题 19
3.3.4  齿轮理论和齿形设计 22
3.3.5  传动比 23
3.3.6  齿轮系设计 24
3.4  擒纵机构 25
3.4.1  非调谐的二中心擒纵机构 25
3.4.2  调谐的二中心擒纵机构 26
3.5  输出 27
3.5.1  模拟和数字输出 27
3.5.2  开关和继电器 28
3.5.3  开关的形式 28
第四章     结论 30
参考文献 31
致谢 32
附图  


30分钟机械定时器的设计......
论文人工降重
本论文在机械模具毕业设计论文栏目,由机械设计论文网整理,转载请注明来源 www.jixielw.top 更多论文,请点机械设计论文网查看
上一篇:2.0MW风力发电机关键零件的加工 下一篇:2.0 MT运动型轿车的离合器设计
推荐论文 本专业最新论文

点击查看关于 30分钟 机械 定时器 设计 的相关论文题目 2011-03-26 08:53:44【返回顶部】
联系方式

相关栏目

数控专业论文
机械设计原创毕业论文
机械模具毕业设计论文
焊工钳工技师论文
机械模具开题报告
理工科论文下载
机械模具免费论文
机械模具外文翻译
联系方式

热门论文

联系方式


机械设计论文网提供机械设计论文范文,行政管理毕业论文,网站永久域名www.jixielw.top 

本站部分文章来自网友投稿上传,如发现侵犯了您的版权,请联系指出,本站及时确认并删除  E-mail: 17304545@qq.com

Copyright@ 2009-2021 机械设计论文网 版权所有