机械设计论文网


  • 首页|
  • 机械模具设计论文|
  • 机械模具开题报告|
  • 机械模具免费论文|
  • 机械模具外文翻译|
  • 数控论文|
  • 机械原创论文|
  • 焊工钳工论文|
  • 理工科论文|
         模具专业毕业设计   机械专业毕业设计   数控专业毕业设计

论文降重

当前位置:机械设计论文网 -> 机械模具毕业设计论文 -> 80WZ70-12无堵泵设计

80WZ70-12无堵泵设计

本文ID:LW15253 字数:12733.页数:36

下载地址 全文下载链接(充值:168元) 如何充值?

80WZ70-12无堵泵设计

论文编号:JX716  论文字数:12733.页数:36   附CAD图

80WZ70-12无堵泵设计.png80WZ70-12无堵泵设计装配图.png

 摘     要
 本文80WZ70-12是旋流泵系列产品中的一个常用规格。该系列无堵塞污水泵,主要适用于输送工业废水和城市生活污水,该泵采用旋流式叶轮,无堵塞性能好,过颗粒能力和长纤维的通过能力较强。颗粒在压水室内流动靠叶轮旋转产生的涡流的推动下运动,悬浮性颗粒本身不产生能量,只是在流道内和液体交换能量。在流动过程中,悬浮性颗粒或长纤维不与叶片接触,叶片多磨损的情况较轻,不存在间隙因磨蚀而加大的情况,在长期运行中不会造成效率严重下降的问题,采用该型式叶轮的泵适合于抽送含有大颗粒和长纤维的介质。 从性能上讲,该叶轮效率较低,仅相当于普通闭式叶轮的70%左右,扬程曲线比较平坦。
 本文中根据泵的设计参数,计算出叶轮、压水室等水力结构参数。根据安全性与可靠性,贯彻标准化和规范化,合理确定和选择配套动力、密封型式、轴承体(托架)结构、联轴器形式和各零配件材料及精度等级。完成设计论文(水力计算说明书),设计绘制总装图及主要零部件图。
 

关键词:旋流泵 设计 水力计算
The pump of 80WZ70-12 Vortex Pump design
 Abstract
 This 80WZ70-12 Series Vortex Pump is a common specification. The series of free plug sewage pumps, mainly used in the transport of industrial wastewater and municipal sewage, the vortex impeller pump, no blocking performance, over capacity and long fiber particles by ability. Indoor particles in the pressurized water flow generated by rotating vortex impeller driven movement, suspended particles themselves do not produce energy, but in the flow channel and fluid exchange of energy. In the flow process, the suspended particles or long fibers and leaves do not touch, leaves the situation much less wear and tear, there is no gap increased due to erosion and the situation, in the long run will not result in a serious decline in efficiency, adopting the impeller type pump suitable for pumping large particles and long fibers containing medium. From a performance perspective, the lower impeller efficiency, equivalent to only 70% of normal closed impeller around, lift curve relatively flat.     This article, in accordance with the pump design parameters, calculate the impeller, the hydraulic pressure structural parameters of the water room. According to security and reliability, standardization and implementation of standardized, rational identification and selection of motive power, sealed type, bearing body (bracket) structure, the coupling forms and materials of all parts and precision. Complete the design of paper (manual hydraulic calculation), assembly design and drawing of maps and map the major parts.
Key words : Vortex Pump  Design  Hydraulic calculation


目录
 第一章 绪论 1
1.1 选题的背景与意义 1
1.2国内外泵产业概况 1
1.2.1 国内发展状况 2
1.2.2国外发展情况 2
1.3研究内容 3
1.4 本章小结 3
 第二章 设计任务 4
2.1 设计题目 4
2.2设计目标与要求 5
2.3研究内容 5
2.4 泵的基本原理 6
2.4.1 泵的定义及分类 6
2.5本章小结 7
 第三章 理论设计计算 8
3.1设计参数 8
3.2设计计算 8
3.3 本章小结 11
 第四章 泵的特性分析 12
4.1泵的类型 12
4.2旋流泵结构参数与泵的性能 12
4.3泵的特性曲线 17
4.4本章小结 18
 第五章 泵电机的选择 19
5.1 泵用电机的选用原则 19
5.2 Y系列小型三相异步电动机的特点 19
5.3 Y系列小型三相异步电动机的安装及外形尺寸 20
 第六章  泵主轴的设计 22
6.1 轴的类型与材料选择 22
6.2轴的强度计算 22
6.3 确定轴上圆角和倒角尺寸 23
 第七章  键的选择计算 24
 第八章 轴承的选取 25
 第九章 精度设计 26
9.1 概述 26
9.2 各零件精度的确定 26
 第十章 泵的发展展望 28
10.1注意发现和开发新领域用泵 28
10.2 CFD、PIV等先进技术结合实际开展试验研究 28
10.3 树立精品意识,重视标准化、通用化 28
10.4 重视关键技术和关键产品的研究与开发 29
10.5 采用复合技术实现泵技术的创新与发展 29
10.6 本章小结 30
 第十一章 总结 31
 参考文献 32
 致 谢 33


80WZ70-12无堵泵设计......
论文人工降重
本论文在机械模具毕业设计论文栏目,由机械设计论文网整理,转载请注明来源 www.jixielw.top 更多论文,请点机械设计论文网查看
上一篇:1100KW两级减速机系统设计计算 下一篇:32LB5-60型螺杆泵设计
推荐论文 本专业最新论文

点击查看关于 80WZ70-12 堵泵 设计 的相关论文题目 2011-03-26 09:33:21【返回顶部】
联系方式

相关栏目

数控专业论文
机械设计原创毕业论文
机械模具毕业设计论文
焊工钳工技师论文
机械模具开题报告
理工科论文下载
机械模具免费论文
机械模具外文翻译
联系方式

热门论文

联系方式


机械设计论文网提供机械设计论文范文,行政管理毕业论文,网站永久域名www.jixielw.top 

本站部分文章来自网友投稿上传,如发现侵犯了您的版权,请联系指出,本站及时确认并删除  E-mail: 17304545@qq.com

Copyright@ 2009-2021 机械设计论文网 版权所有