机械设计论文网


  • 首页|
  • 机械模具设计论文|
  • 机械模具开题报告|
  • 机械模具免费论文|
  • 机械模具外文翻译|
  • 数控论文|
  • 机械原创论文|
  • 焊工钳工论文|
  • 理工科论文|
         模具专业毕业设计   机械专业毕业设计   数控专业毕业设计

论文降重

当前位置:机械设计论文网 -> 机械模具毕业设计论文 -> 防尘盖冲压模具设计

防尘盖冲压模具设计

本文ID:LW3129 字数:11086.页数:24

下载地址 全文下载链接(充值:128元) 如何充值?

防尘盖冲压模具设计

论文编号:JX156  所有图纸,外文翻译,开题报告,任务书,论文字数:11086.页数:24

防尘盖冲压模具设计.png防尘盖冲压模具设计装配图.png

摘    要

      本设计进行了落料、冲孔、拉深复合模的设计。文中简要概述了冲压模具目前的发展状况和趋势。对产品进行了详细工艺分析和工艺方案的确定。按照冲压模具设计的一般步骤,计算并设计了本套模具上的主要零部件,如:凸模、凹模、凸模固定板、垫板、凹模固定板、卸料板、导尺、挡料销、导正销等。模架采用标准模架,选用了合适的冲压设备。设计中对工作零件和压力机规格均进行了必要的校核计算。此外,本模具采用始用挡料销和钩形挡料销挡料。模具的冲孔和落料凸模分别用不同的固定板固定,便于调整间隙;冲孔凹模和落料凹模则采用整体固定板固定。落料凸模内装有导正销,保证了工件上孔和外形的相对位置准确,提高了加工精度。如此设计出的结构可确保模具工作运行可靠和冲压产品大批量生产的要求。关键词: 复合模  校核  冲孔  落料  拉深。
                                      
Abstract

        The design of the blanking and punching, drawing composite modulus design. This paper briefly outlined the Stamping Die current development status and trends. The product of a detailed analysis and the identification process. Stamping die design in accordance with the general steps to calculate and design the sets on the main mold parts, such as : punch and die. Punch plate, plate, Die plate and dump plates I. feet behind the sales, marketing and other derivative is. Die-standard model planes, to choose a suitable stamping equipment. Design work on the parts and specifications will press for the necessary checking calculation. In addition, the die block used only with marketing materials and Crook block behind the marketing materials. Punch and Die blanking punch were different plate fixed to facilitate adjustment gap; Punch and Die blanking die is used overall fixed plate. Blanking punch contents is a derivative sales, and guarantee the workpiece and the shape of the holes in the relative position accurately, improve processing accuracy. So the structure is designed to ensure reliable operation of die stamping products and mass production requirements.

Keywords : composite modules   Check   Punching   Blanking   Drawing.

目录
1.绪论  1
1.1冲压技术概念  1
1.2我国模具技术的发展趋势  2
1.3 复合模的主要特点  7
1.4 模具CAD技术  7
1.5 本课题的来源及主要任务  8
2.冲压件的工艺分析  9
2.1工艺方案的分析和确定  10
2.1.1毛坯直径D的计算  10
2.1.2 拉深次数n的计算  10
2.2 工艺方案的确定  10
2.3计算各工序压力、压力中心、初选压力机  11
2.3.1冲裁力的计算  12
2.3.2.初选压力机  12
2.3.4.确定压力中心  13
2.4冲压工序  13
2.5模具结构设计  13
2.5.1模具结构选择  13
2.5.2模具工作部分的尺寸和公差的确定  14
2.5.3 模具结构设计  15
2.6整修工序  16
3.结论  19
4.致谢  20
5.参考文献  21


防尘盖冲压模具设计......
论文人工降重
本论文在机械模具毕业设计论文栏目,由机械设计论文网整理,转载请注明来源 www.jixielw.top 更多论文,请点机械设计论文网查看
上一篇:肥皂盒模设计 下一篇:阀体零件的工艺设计
推荐论文 本专业最新论文

点击查看关于 防尘盖冲压模具设计 的相关论文题目 2009-06-18 10:49:08【返回顶部】
联系方式

相关栏目

数控专业论文
机械设计原创毕业论文
机械模具毕业设计论文
焊工钳工技师论文
机械模具开题报告
理工科论文下载
机械模具免费论文
机械模具外文翻译
联系方式

热门论文

联系方式


机械设计论文网提供机械设计论文范文,行政管理毕业论文,网站永久域名www.jixielw.top 

本站部分文章来自网友投稿上传,如发现侵犯了您的版权,请联系指出,本站及时确认并删除  E-mail: 17304545@qq.com

Copyright@ 2009-2021 机械设计论文网 版权所有