机械设计论文网


  • 首页|
  • 机械模具设计论文|
  • 机械模具开题报告|
  • 机械模具免费论文|
  • 机械模具外文翻译|
  • 数控论文|
  • 机械原创论文|
  • 焊工钳工论文|
  • 理工科论文|
         模具专业毕业设计   机械专业毕业设计   数控专业毕业设计

论文降重

当前位置:机械设计论文网 -> 机械模具毕业设计论文 -> 高空作业车液压系统设计

高空作业车液压系统设计

本文ID:LW3131 字数:16360.页数:43

下载地址 全文下载链接(充值:128元) 如何充值?

高空作业车液压系统设计

论文编号:JX159  所有图纸,开题报告,论文字数:16360.页数:43

高空作业车液压系统设计.png

摘    要
      高空作业车是将高空作业人员和必要的工具送至空中,并提供工作人员空中作业场所的机械。起重机是一种能在一定范围内垂直起升和水平移动物品的机械,动作间歇性和作业循环性是起重机工作的特点。
本次设计以徐州海伦哲工程机械有限公司研制开发的“GKZ14型高空作业车”为研究对象,对该车上的液压系统进行设计。此型号高空作业车除高空作业机构外还设有起重装置,一机多用。
    高空作业部分主要是指控制上下臂变幅运动的液压缸,控制上下臂回转运动的液压马达。起重部分主要是控制伸缩臂伸缩运动的液压缸,以及控制起重钢丝绳收进放出的液压马达。本文着重高空作业机构的变幅液压缸和回转液压马达设计,简略起重机构。文中详细记录了高空作业机构上臂液压缸的设计过程,简略设计下臂液压缸以及起重机构部分的伸缩液压缸;记录了高空作业部分回转机构的液压马达和起重部分起升机构的液压马达的设计选型过程,以及液压泵,油箱的选型过程。在确定液压系统元件参数的基础上,完成了液压传动系统的设计计算。

关键词: 高空作业车;起重机构;液压传动系统设计;液压缸;液压马达


Abstract
       The aerial platform vehicle sends high rise operation personnel and the tool of the necessity to the air, and provide the staff member with the high rise operation amenity machine.The derrick is a kind of machine that cans be perpendicular in the certain scope to rise to rise to move a product with level, the action by fits and starts and the homework circulation are the characteristicses of the derrick work, can press the main use and the structure characteristic classification.
  The high rise operation mechanism mainly is the fluid cylinder that the control points a top and bottom arm to luffe, and the hydranlic moter to control top and bottom arm turns around.Jack mechanism mainly is a control flexible sport of flexible arm of the liquid press an urn, rise a heavy steel wire rope to accept into let out of the liquid press motor.This text emphasizes high rise operation mechanism to become a liquid to press an urn and turns round  design, Chine is a jack mechanism slightly.Recorded high empty homework organization parts of upper arm liquids to press the design process of the urn in detail in the text, Chien designed slightly the arm liquid press the flexible liquid of the urn and the jack mechanism part to press an urn.It recorded high rise operation mechanism to turn round the liquid of the organization to press motor and rise heavy part to rise to rise the design that the liquid of the organization presses motor to choose a process in the text, and the liquid press a pump, the fuel tank chooses a process.Base on  the system component parameter in hydranlic , completed the designion and calculation of the hydranlic system.

Keywords: aerial platform vehicle;jack mechanism ;hydranlic system design;fluid cylinder;hydrauhc motor.

 

目 录
摘要……………………………………………………………………………………1
Abstract………………………………………………………………………………2
前言……………………………………………………………………………………3
第1章 绪论 …………………………………………………………………………4
1.1 高空作业车的发展状况……………………………………………………4
1.2 课题的来源和意义…………………………………………………………4
1.3 基本参数及主要技术性能指标……………………………………………5
第2章 液压系统设计 ………………………………………………………………8
2.1 液压系统的构成……………………………………………………………8
2.2 液压系统设计概述…………………………………………………………8
2.3 设计依据……………………………………………………………………8
2.4 主要机构简述………………………………………………………………9
2.5 主要工作机构液压回路设计 ……………………………………………10
2.5.1 高空作业车起升机构的液压回路设计 ………………………………10
2.5.2 高空作业车吊臂伸缩机构液压回路设计 ……………………………12
2.5.3 高空作业车回转机构液压回路 ………………………………………12
2.5.4 高空作业车变幅机构液压回路设计 …………………………………13
2.6 整体液压回路设计 ………………………………………………………14
第3章 高空作业部分液压系统的设计计算………………………………………18
3.1 上臂油缸的设计 …………………………………………………………18
3.1.1 确定液压缸类型和安装方式 …………………………………………18
3.1.2 确定液压缸的主要性能参数和主要尺寸 ……………………………18
3.2 下臂油缸的设计计算 ……………………………………………………23
3.2.1 确定液压缸类型和安装方式 …………………………………………23
3.2.2 确定液压缸的主要性能参数和主要尺寸 ……………………………23
3.3 回转机构液压马达设计 …………………………………………………28
3.3.1 转矩计算 ………………………………………………………………28
第4章 起重机构的液压部分设计…………………………………………………31
4.1 伸缩机构液压缸设计 ……………………………………………………31
4.1.1 确定液压缸类型和安装方式 …………………………………………31
4.1.2 确定伸缩液压缸的主要性能参数和主要尺寸 ………………………31
4.2 起升机构液压马达设计计算 ……………………………………………34
第5章 液压泵的确定………………………………………………………………36
5.1 液压泵的主要技术参数 …………………………………………………36
5.1.1 主要技术参数 …………………………………………………………36
5.1.2 各种泵的比较 …………………………………………………………36
5.2 液压泵的确定 ……………………………………………………………37
5.3 油箱的选择 ………………………………………………………………39
第6章 支腿液压回路简介…………………………………………………………40
总结 …………………………………………………………………………………41
后记 …………………………………………………………………………………42
参考文献 ……………………………………………………………………………43


高空作业车液压系统设计......
论文人工降重
本论文在机械模具毕业设计论文栏目,由机械设计论文网整理,转载请注明来源 www.jixielw.top 更多论文,请点机械设计论文网查看
上一篇:高速压力机 下一篇:肥皂盒模设计
推荐论文 本专业最新论文

点击查看关于 高空作业车 液压系统设计 的相关论文题目 2009-06-18 10:50:14【返回顶部】
联系方式

相关栏目

数控专业论文
机械设计原创毕业论文
机械模具毕业设计论文
焊工钳工技师论文
机械模具开题报告
理工科论文下载
机械模具免费论文
机械模具外文翻译
联系方式

热门论文

联系方式


机械设计论文网提供机械设计论文范文,行政管理毕业论文,网站永久域名www.jixielw.top 

本站部分文章来自网友投稿上传,如发现侵犯了您的版权,请联系指出,本站及时确认并删除  E-mail: 17304545@qq.com

Copyright@ 2009-2021 机械设计论文网 版权所有