机械设计论文网


  • 首页|
  • 机械模具设计论文|
  • 机械模具开题报告|
  • 机械模具免费论文|
  • 机械模具外文翻译|
  • 数控论文|
  • 机械原创论文|
  • 焊工钳工论文|
  • 理工科论文|
         模具专业毕业设计   机械专业毕业设计   数控专业毕业设计

论文降重

当前位置:机械设计论文网 -> 机械模具毕业设计论文 -> 连杆孔研磨装置设计

连杆孔研磨装置设计

本文ID:LW3142 字数:8560.页数:23

下载地址 全文下载链接(充值:128元) 如何充值?

连杆孔研磨装置设计

论文编号:JX179 所有图纸,任务书,开题报告,论文字数:8560.页数:23

连杆孔研磨装置设计.png连杆孔研磨装置设计外观图.png

摘   要

     连杆是柴油机中非常重要的一个部件,它连接了活塞与曲轴,把作用在活塞顶面的气体膨胀的力传给了曲轴,使活塞的往复运动变为了曲轴的旋转运动。连杆在工作中承受着剧烈变化的动载荷,承受着瞬变的旋转压力。连杆在运动中形成的惯性力和离心力相当大,在这样的工作条件下,要求连杆有强度高、重量轻、刚性好、韧性强、使用寿命长的特点。
 连杆大小头孔在金刚镗床上加工后进行手动滚压小头孔,这种加工只适应于小批量生产,然而在大批量的生产中就没有实际的意义,因为这种加工不容易达到精度和表面粗糙度要求。为了解决这一问题,需要在加工方法上进行改进,使用能同时研磨大小头孔的专用装置,以提高生产率,减轻劳动强度,提高加工精度。所以设计了这台能同时研磨大小头孔的专用机床。
  
关键词:连杆、强度、寿命、改进、效率。
 

Abstract

       Connecting rod is a very important diesel engine component. It links the piston and crank, piston top face in the role of the gas expansion of the crank to enable the movement to the piston into the rotation of the crank movement. Connecting rod dramatic changes in their work bear the moving load, the D-bear pressure. Connecting rod in the movement of inertia and centrifugal force considerable power in the working conditions for connecting rod with high intensity, light weight, although good, strong resilience, life-long characteristics.
    Connecting rod sizes in the first lords boring lathe processing Kong after the first small hand rollers Kong, which only apply to small batch processing, and then in the production of large quantities of no practical significance, since it is not easy to achieve precision processing and surface roughness. To address this problem, the need for improvements in processing methods, and equipment used to the size of the first Kong dedicated machine tools to increase productivity and reduce labor intensity, and enhance processing accuracy. 
   Keywords:Connecting rod、Intensity、 life expectancy,、improve、 efficiency。

目录
前言....................................................................1
摘要....................................................................2
1 课题的提出..........................................................4
2  传动方案的拟定.......................................................5
2.1 设计的目的分析......................................................5
2.2 主运动传动方案的确定................................................5
2.3 进给运动传动方案的确定..............................................5
3 设计计算.............................................................8
3.1  计算连杆大小头内孔面积.............................................8
3.2  计算传递效率.......................................................8
3.3  选择电机...........................................................8
3.4  计算大小头孔主轴的传递功率及转速...................................8
3.5  主轴设计...........................................................13
3.6  键的选择...........................................................17
3.7  轴承的选择.........................................................18
4  研磨头部分的设计.....................................................23
4.1  研具材料的选择.....................................................23
4.2  研磨棒的结构.......................................................23
4.3  研磨操作工艺参数的选取.............................................23
4.4  研磨膏的配制.......................................................23
5 其他结构的设计........................................................25
5.1 主轴箱的结构设计....................................................25
5.2床身的设计...........................................................25
5.3底座的设计...........................................................25
5.4防护罩...............................................................25
6 重点分析说明..........................................................27
6.1 主轴支承部分结构的分析..............................................27
6.2  轴承的润滑.........................................................27
7 使用及其维护说明......................................................29
7.1  使用说明...........................................................29
7.2  维护说明...........................................................29
致谢...................................................................30
参考资料................................................................30


连杆孔研磨装置设计......
论文人工降重
本论文在机械模具毕业设计论文栏目,由机械设计论文网整理,转载请注明来源 www.jixielw.top 更多论文,请点机械设计论文网查看
上一篇:普通机床数控改造 下一篇:立轴式破碎机设计
推荐论文 本专业最新论文

点击查看关于 连杆孔研磨装置 设计 的相关论文题目 2009-06-18 11:02:22【返回顶部】
联系方式

相关栏目

数控专业论文
机械设计原创毕业论文
机械模具毕业设计论文
焊工钳工技师论文
机械模具开题报告
理工科论文下载
机械模具免费论文
机械模具外文翻译
联系方式

热门论文

联系方式


机械设计论文网提供机械设计论文范文,行政管理毕业论文,网站永久域名www.jixielw.top 

本站部分文章来自网友投稿上传,如发现侵犯了您的版权,请联系指出,本站及时确认并删除  E-mail: 17304545@qq.com

Copyright@ 2009-2021 机械设计论文网 版权所有