机械设计论文网


  • 首页|
  • 机械模具设计论文|
  • 机械模具开题报告|
  • 机械模具免费论文|
  • 机械模具外文翻译|
  • 数控论文|
  • 机械原创论文|
  • 焊工钳工论文|
  • 理工科论文|
         模具专业毕业设计   机械专业毕业设计   数控专业毕业设计

论文降重

当前位置:机械设计论文网 -> 机械模具毕业设计论文 -> 女性手机外覆盖件(上盖)造型设计及注塑模具设计

女性手机外覆盖件(上盖)造型设计及注塑模具设计

本文ID:LW3211 字数:13758.页数:38

下载地址 全文下载链接(充值:128元) 如何充值?

女性手机外覆盖件(上盖)造型设计及注塑模具设计

论文编号:JX1544 论文字数:13758.页数:38  附CAD图,三维图

注塑模具设计.png手机上盖注塑模具设计.png手机上盖注塑模具装配图.png

女性手机外覆盖件(上盖)造型设计及注塑模具设计
 
摘    要

 本课题采用Pro/E软件对电话机面板及相应的注塑模具进行了三维造型设计。通过电话机面板零件和所用的原料分析,探讨了制件的注塑模具成型工艺,设计了一模一腔的塑料模具。在电话机面板零件注塑模具设计中主要确定了模具结构方案,包括型腔布置,分型面和浇注系统的确定,顶出方式的选择,模具材料的选择和强度计算,主要成型零件、结构零件的结构形式确定,模具各部件的强度校核,成型零件工作尺寸计算等。 并正确掌握模具模块的设计技巧和方法,完成了模具的三维建模以及装配。本文所设计的模具具有结构简单、运动可靠和排气良好等优点,特别适用于本制品的复杂且薄壁的形状。本文充分利用现代三维CAD设计软件,利用其自顶向下的功能,运用装配分析工具,检查了模具的干涉可能性,验证了设计结果,充分展现了3D在模具设计中的良好应用能力。
 
关键词: 塑料模具  PRO/E  CAD

Woman Outside Covering MobileModelling DesignAnd Injection Mould Design

Student: Weng Zhitong     Advisor: Ling wei

School of Mechanical and Automotive Engineering
Zhejiang University of Science and Technology

Abstract
 The research adopted Pro/E software in designing the 3D sculpting of the telephone panel and its injection mold. Through an analysis of telelphone panel parts and its material, it discussed the parts’ molding process and designed a mold with two cavities. It determined the mold’s structure plan, including the confirmation of cavity arrangement, parting line and gating system, the selection of ejection modes and mold’s material and its strength calculation. Besides, it also ensured the structures of main formed parts and structural parts, and the check of mold’s parts’ strength, as well as formed parts’ work sizes. It grasped the methods and skills on and finished the mold’s 3D modeling and its assembly. The mold designed in the research had advantages of simple structure, reliable motion and good vents. It is suitable for the part which is complex with thin layer. This research made full use of moden 3D CAD design sortware, and use top-down function and assembly analysis tool to check the mold’s interference possibility and verified the design result. It fully showed 3D’s good application in mold design.
 
 
Key words: mold   Pro/E   CAD
 
 
 
 
 
 

 目   录
摘    要 I
Abstract II
目   录 III
第一章  绪论 1
1.1   引言 1
1.1.1  塑料行业发展趋势 1
1.1.2  模具行业发展趋势 1
1.1.3  模具技术发展趋势 1
1.2   基于PRO/E的塑料制品的设计 3
1.2.1  PRO/E软件简介 3
1.2.2  Pro/E模具设计基本流程 3
1.3  小结 4
第二章  手机覆盖件三维造型设计 5
2.1  分析图纸 5
2.2  三维造型设计 5
第三章  注塑模具的分模设计 9
3.1  型腔数目的确定 9
3.2  分型面的设计和体积快的分割 9
第四章  整体模架的设计 14
4.1  模具总体结构设计 14
4.2  注射机的选择 15
4.3  基于EMX4.1的模架设计 17
4.3.1  EMX的简介 17
4.3.2  EMX4.1的模架设计流程 17
4.4  模架组件的设计 21
4.4.1  注射模的标准模架 21
4.4.2  固定板、动模支承板 22
4.4.3  支撑件的设计 24
4.4.4  动定模座板 25
4.4.5  导向机构的设计 25
4.5  成型零部件的结构设计 27
第五章  推出机构及冷却系统的设计 28
5.1  推出机构的设计 28
5.2  冷却系统的设计 29
5.3  排气系统的设计 30
5.4  模具闭合高度的确定和校核 30
第六章 总结 32
参考文献: 33
致  谢 34


女性手机外覆盖件(上盖)造型设计及注塑模具设计......
论文人工降重
本论文在机械模具毕业设计论文栏目,由机械设计论文网整理,转载请注明来源 www.jixielw.top 更多论文,请点机械设计论文网查看
上一篇:薄煤层采煤机截割部设计 下一篇:能自动配比的乳化液泵站设计
推荐论文 本专业最新论文

点击查看关于 女性 手机 覆盖 上盖 造型设计 注塑 模具设计 的相关论文题目 2009-06-18 16:16:22【返回顶部】
联系方式

相关栏目

数控专业论文
机械设计原创毕业论文
机械模具毕业设计论文
焊工钳工技师论文
机械模具开题报告
理工科论文下载
机械模具免费论文
机械模具外文翻译
联系方式

热门论文

联系方式


机械设计论文网提供机械设计论文范文,行政管理毕业论文,网站永久域名www.jixielw.top 

本站部分文章来自网友投稿上传,如发现侵犯了您的版权,请联系指出,本站及时确认并删除  E-mail: 17304545@qq.com

Copyright@ 2009-2021 机械设计论文网 版权所有