机械设计论文网


  • 首页|
  • 机械模具设计论文|
  • 机械模具开题报告|
  • 机械模具免费论文|
  • 机械模具外文翻译|
  • 数控论文|
  • 机械原创论文|
  • 焊工钳工论文|
  • 理工科论文|
         模具专业毕业设计   机械专业毕业设计   数控专业毕业设计

论文降重

当前位置:机械设计论文网 -> 机械模具毕业设计论文 -> 90万吨矿山摩擦式提升机设计

90万吨矿山摩擦式提升机设计

本文ID:LW7106 字数:21105,页数:55

下载地址 全文下载链接(充值:168元) 如何充值?

90万吨矿山摩擦式提升机设计

论文编号:JX525   论文字数:21105,页数:55  有CAD图,开题报告,任务书,实习报告

90万吨矿山摩擦式提升机设计.png90万吨矿山摩擦式提升机设计装配图.png

摘 要:矿井提升设备的任务是沿井筒提煤、矿石、矸石,下放材料,升降人员和设备。本设计通过选箕斗、钢丝绳、提升机、天轮、井架、电动机等来叙述提升机的设备选型。
 在矿井提升中,应根据不同的用途,应选用合适的箕斗、钢丝绳、提升机、天轮、井架、电动机,扬长避短,充分发挥它们的效能。为此,必须掌握矿井提升设备的结构、工作原理、性能特点、选择设计、运转理论等方面的知识,以做到选型合理,正确使用与维护,使之安全、可靠、经济的运转。
 多绳摩擦式提升机具有安全性高、钢丝绳直径细、主导轮直径小、设备重量轻、耗电少、价格便宜等优点,发展很快。除用于深立井提升外,还可用于浅立井和斜井提升。  
 本设计从以下几方面进行了设计分析:
提升容器的选择计算:主要进行了箕斗的容量计算及规格选择;
钢丝绳的结构、规格选择、计算和维护等;
多绳摩擦式提升机和电机的选择计算;
提升系统总体布置;
提升系统的动力学和运动学计算;
对所选提升机、电动机、钢丝绳等校核计算。

关键词:摩擦式;提升机;钢丝绳;电动机

Abstract

 Mine Hoist equipment is raised along the shaft coal, ores, coal, decentralization material, personnel and equipment movements. The selection of the design of vehicles, the rope, elevator, and space launches, Derrick, motors, etc. to describe the Hoist Equipment Selection.
 In the mine upgrade, according to the different uses, to choose an appropriate vehicles, the rope, elevator, and space launches, Derrick, motors, exceed and give full play to their effectiveness that we must master the mine hoisting equipment structure, working principles, characteristics, select the design, operation theory of knowledge, Selection reasonable to do, the proper use and maintenance to make it safe, reliable and economic operation.
   Multi-rope friction hoist with a safe, small diameter wire rope, small-diameter round led, light-weight equipment, less power consumption, the advantages of cheap, rapid development. In addition to upgrading for deep shaft, the shaft can also be used for shallow and inclined to upgrade.
 The design analyzing were as follows:
1.  Advancing container selection and calculation: The skip capacity calculation and the standard selection is chiefly carried on;
2.  The composition of wire rope, standard selection, calculation and protection and so on;
3.  Much cords rub style lifter and electrical machinery selection calculation;
4.  Advance systematic general arrangement;
5.  Advancing system kinetics and kinematics calculation;
6.  To choosing lifter, electric motor and wire rope and so on colleges calculate to reckon.
 
Keywords:  Friction ; Elevator;  Wire rope;  Motor

 

目    录

摘 要 I
Abstract II
第1章 绪论 1
1.1 概述 1
1.2 矿山提升设备的发展历史及趋势 2
1.3 矿山提升设备的组成 3
1.4  摩擦式矿井提升机 4
第2 章  提升容器 6
2.1 箕斗及其装载设备 6
2.2箕斗规格选择及其计算 8
第3章 提升钢丝绳 11
3.1 钢丝绳的结构和选用 11
3.2 钢丝绳的选择计算 14
3.3 钢丝绳的维护和试验 19
第 4 章  多绳摩擦提升系统设计 20
4.1多绳摩擦式提升机的特点 20
4.2 多绳摩擦式提升机的组成 21
4.3 多绳摩擦提升机的选择计算 24
第5章 提升系统参数配置 25
5.1 井塔高度的确定 25
5.2校验主导轮衬垫 26
第6章 提升机的电力拖动装置 28
6.1 拖动装置的种类及性能 28
6.2 预选电动机 28
6.3交流感应电动机的控制 30
第7章 提升设备运动学计算 33
7.1 提升系统的变位质量 33
7.2 主加减速度的确定 34
7.3 运动学各参数计算 37
第8章  提升系统的防滑验算 41
8.1 防滑验算 41
8.2 安全制动 42
第9章 提升系统动力学的计算 44
第10章  电动机容量校核、提升电耗和效率 46
10.1 电动机容量校核 46
10.2 提升设备的电耗及效率计算 47
结束语 49
参考文献 50
致   谢 51
附 录 一:英文 52
附 录 二:译文 60


90万吨矿山摩擦式提升机设计......
论文人工降重
本论文在机械模具毕业设计论文栏目,由机械设计论文网整理,转载请注明来源 www.jixielw.top 更多论文,请点机械设计论文网查看
上一篇:塑料瓶的模具设计 下一篇:工程挖掘机执行机构设计
推荐论文 本专业最新论文

点击查看关于 90万吨 矿山 摩擦 提升机 设计 的相关论文题目 2010-05-16 11:31:11【返回顶部】
联系方式

相关栏目

数控专业论文
机械设计原创毕业论文
机械模具毕业设计论文
焊工钳工技师论文
机械模具开题报告
理工科论文下载
机械模具免费论文
机械模具外文翻译
联系方式

热门论文

联系方式


机械设计论文网提供机械设计论文范文,行政管理毕业论文,网站永久域名www.jixielw.top 

本站部分文章来自网友投稿上传,如发现侵犯了您的版权,请联系指出,本站及时确认并删除  E-mail: 17304545@qq.com

Copyright@ 2009-2021 机械设计论文网 版权所有