机械设计论文网


  • 首页|
  • 机械模具设计论文|
  • 机械模具开题报告|
  • 机械模具免费论文|
  • 机械模具外文翻译|
  • 数控论文|
  • 机械原创论文|
  • 焊工钳工论文|
  • 理工科论文|
         模具专业毕业设计   机械专业毕业设计   数控专业毕业设计

论文降重

当前位置:机械设计论文网 -> 机械模具毕业设计论文 -> 塑料瓶的模具设计

塑料瓶的模具设计

本文ID:LW7193 字数:11780,页数:31

下载地址 全文下载链接(充值:168元) 如何充值?

塑料瓶的模具设计

论文编号:JX526   论文字数:11780,页数:31 有PROE图

本设计(论文或其他)应达到的要求:
  本设计要利用Pro/E软件设计塑料瓶的模型。在制品完成后,根据该制品,设计出相应的中

空吹塑模具。将塑料瓶模型以及模具设计的过程描述出来,并阐述出当前模具业在国内外的发展

现状。                             
其他:
附带在论文中用到的Pro/E文件。

摘  要
 随着现代工业发展的需要,塑料制品在工业、农业和日常生活等各个领域的应用越来越广泛,质量要求也越来越高。在塑料制品的生产中,高质量的模具设计、先进的模具制造设备、现代化的成型设备等都是成形优质塑件的重要条件。
本毕业设计是利用Pro/E软件设计我们日常生活中最常见的塑料瓶,设计出它的模型,并对其进行开模。塑料瓶模具的设计主要是运用中空吹塑成型。通过该瓶模具的设计,介绍了中空吹塑模具的设计方法。中空吹塑成形模具也是塑料模具设计中运用比较广泛的一种。运用Pro/E软件设计塑料瓶的模具,主要包括模型的创建与导入、模具型腔设计,模架设计,冷却系统以及导柱导套的设计。

 关键词:模具设计    Pro/E    塑料瓶   
 
Abstract
 With the development of modern industry, Plastic products applied in the industry, agriculture and other fields of daily life has become more and more widely. The demand for quality is also getting higher and higher. 
 In the production of plastic products, High-quality mold design, advanced mold manufacturing equipments, modern molding equipment etc. are important conditions for producting a high-quality mold. This graduation paper uses Pro/E software to design a plastic bottle that is most common in our daily lives. We first design its model, then open its mode. we used hollow blow molding technology during the plastic bottle mold design. By designing the mold of this plastic bottle, we introduced the design method of blow molding hollow. Hollow blow molding technology widely used in Plastic mold design. we uses Pro/E software to design the plastic bottle mold. Major steps include creation and import model, design mold cavity, design model structure, design cooling System, guide pillars and guide bushes.
 
 
Keywords:    Mold Design    Pro/E    Plastic bottle
 
 
 
目  录

摘  要 I
Abstract III
第一章引 言 1
1.1模具的国内外发展现状 1
1.2本毕业设计的研究意义 2
第二章塑料瓶模型设计 3
2.1瓶体的创建 3
2.2添加瓶体花纹 4
2.3瓶底的设置 6
2.4添加瓶颈 7
2.5添加壳特征 8
2.6添加瓶颈螺纹 8
2.7完成创建并保存 9
第三章 塑料瓶模具设计 10
3.1调整设计模型 10
3.2创建模具模型 10
3.3创建模具型腔 12
3.4创建模具模架 15
3.5添加冷却系统 17
3.6创建导柱导套 19
3.7铸模 22
3.8开模仿真 23
第四章  总结与展望 24
4.1我国模具行业发展的总结与展望 24
4.2毕业设计完成的心得体会 25
致 谢 26
参考文献 27


塑料瓶的模具设计......
论文人工降重
本论文在机械模具毕业设计论文栏目,由机械设计论文网整理,转载请注明来源 www.jixielw.top 更多论文,请点机械设计论文网查看
上一篇:接水盒产品造型与模具设计 下一篇:90万吨矿山摩擦式提升机设计
推荐论文 本专业最新论文

点击查看关于 塑料瓶 模具设计 的相关论文题目 2010-05-18 13:16:26【返回顶部】
联系方式

相关栏目

数控专业论文
机械设计原创毕业论文
机械模具毕业设计论文
焊工钳工技师论文
机械模具开题报告
理工科论文下载
机械模具免费论文
机械模具外文翻译
联系方式

热门论文

联系方式


机械设计论文网提供机械设计论文范文,行政管理毕业论文,网站永久域名www.jixielw.top 

本站部分文章来自网友投稿上传,如发现侵犯了您的版权,请联系指出,本站及时确认并删除  E-mail: 17304545@qq.com

Copyright@ 2009-2021 机械设计论文网 版权所有