机械设计论文网


  • 首页|
  • 机械模具设计论文|
  • 机械模具开题报告|
  • 机械模具免费论文|
  • 机械模具外文翻译|
  • 数控论文|
  • 机械原创论文|
  • 焊工钳工论文|
  • 理工科论文|
         模具专业毕业设计   机械专业毕业设计   数控专业毕业设计

论文降重

当前位置:机械设计论文网 -> 机械模具毕业设计论文 -> 龙门式液体密度测量台设计及加工工艺

龙门式液体密度测量台设计及加工工艺

本文ID:LW9786 字数:6663,页数:41

下载地址 全文下载链接(充值:128元) 如何充值?

龙门式液体密度测量台设计及加工工艺

论文编号:JX619 说明书字数:6663,页数:41 有外文翻译,CAD图

龙门式液体密度测量台设计及加工工艺.png

摘  要

 测量是工业生产过程当中一项不可少缺的工艺。测量技术的发展,也能从客观上反映一个国家或地区的工业发展状况。测量技术越发达,此地区的工业发展就越高。而液体密度的测量是工业测量技术当中很重要的一项技术。本文详细介绍了,从设计理念到每一步具体工艺的设计过程。包括了龙门式液体密度测量台此机器的驱动方案、传动方案、支承方案、执行方案及工艺方案等设计过程。在设计过程中,辅以计算机设计,大大地节省了设计时间。在此课题中,因所选择参数均为机械设计手册中的最常用参数,所以设计过程中,并没有多大困难,只是设计过程中数据过多,计算繁琐。从客观上来说,也说明了此设计课题的经济性。

关键词:龙门式液体密度测量台  测量  测量台  工艺

Abstract

 Measurement is essential for industrial production process of a lack of technology.Measurement technology development, but also from the objective of a country or region's industrial development.The more advanced measurement technology, industrial development in the region higher. The liquid density measurement is a very important industrial techniques are a technology.This paper describes, from design concept to the specific process every step of the design process.Including the goal-liquid density measuring units of this machine-driven program, transmission programs, supporting programs, the implementation of programs and technology programs of the design process.In the design process, supplemented by computer design, greatly saving design time.In this issue, the result of mechanical design of the selected parameters are the most commonly used parameters in the manual, so the design process, and not much difficulty, but the design process too much data, very complex.From an objective point of view, also explains the design issues of economy.
 
Keywords:Liquid density measurement units Gantry;Measure;Measuring units;   Technology

目 录
摘  要 I
Abstract II

第1章 绪 论 1
1.1选题的依据、意义和理论或实际应用方面的价值 1
1.2本课题在国内外的研究现状 1
1.3 本课题的优势与意义 2
第2章 总体方案设计 3
2.1设计任务 3
2.2驱动方案 3
2.3传动方案 3
2.4顶盖设计 3
2.5总体方案设计: 4
第3章 传动柱设计 5
3.1 尺寸设计 5
3.2 材料选择 5
3.3 力学验证 5
3.4 升角设计(要求能自锁) 6
3.5 传动柱加工工艺设计 7
3.5.1 工艺分析 7
3.5.2 毛坯选择 8
3.5.3 工艺过程设计 8
第4单  齿轮设计 9
4.1 初步结构选定 9
4.2 传动比的初步选定 9
4.3 初步参数的选定 9
4.4 齿轮结构的初步选定 12
4.5 齿轮校正 13
4.5.1 选定齿轮类型、精度、材料及齿数 13
4.5.2按齿面接触强度设计校核 13
第5章 轴承的设计 23
5.1 小型滚动轴承 23
5.1.1 承载能力: 23
5.1.2 速度特性 23
5.1.3 调心性 23
5.1.4 运转精度 24
5.1.3 轴承的初步选定 24
5.2 轴承校核计算 24
5.2.1 61806型轴承 24
5.2.2按额定动载荷计算 24
第6章 轴的设计 31
6.1轴的强度校核计算 31
6.1.1按扭转强度条件计算 31
6.1.2按弯曲扭转合成强度条件计算 33
6.2 轴的结构设计 37
6.2.1 2号轴(中间轴) 37
6.2.2 驱动轴(3号轴) 38
第7章 键的设计与校核 39
7.1键的选择 39
7.2键连接的强度校核 39
第8章 其他设计计算 41
8.1上、下盖设计 41
8.2 侧板设计 41
8.3 套筒设计 42
结 论 43
参考文献 44
致 谢 45


龙门式液体密度测量台设计及加工工艺......
论文人工降重
本论文在机械模具毕业设计论文栏目,由机械设计论文网整理,转载请注明来源 www.jixielw.top 更多论文,请点机械设计论文网查看
上一篇:十八头齿轮分油器设计及加工工艺 下一篇:带轮式液体密度测量台设计及加工..
推荐论文 本专业最新论文

点击查看关于 龙门 液体 密度 测量 设计 加工 工艺 的相关论文题目 2010-08-25 12:02:22【返回顶部】
联系方式

相关栏目

数控专业论文
机械设计原创毕业论文
机械模具毕业设计论文
焊工钳工技师论文
机械模具开题报告
理工科论文下载
机械模具免费论文
机械模具外文翻译
联系方式

热门论文

联系方式


机械设计论文网提供机械设计论文范文,行政管理毕业论文,网站永久域名www.jixielw.top 

本站部分文章来自网友投稿上传,如发现侵犯了您的版权,请联系指出,本站及时确认并删除  E-mail: 17304545@qq.com

Copyright@ 2009-2021 机械设计论文网 版权所有